All Data Translation frame grabbers are supported by Neurocheck SW. One shall check in menu System, Device Manager, whether correct frame grabber and camera is selected. In demo version only one frame grabber can be installed and one camera can be selected at the time. If the frame installed is not the one needed then using New and answering Next or Finish all physically installed boards are installed. Then one should choose the proper one and Remove all others. Each combination of the camera and the frame grabber needs its particular setup of parameters. They can be manually adjusted in Properties dialog. Recommended values are in camera values Those parameters are also prepared in Camera setup files and can be loaded using Import key. They are stored in Vision_appl:\software\dt\fgsdk32\camfiles. Note that a and d at the end means analog or digital output, CCIR are normal, "European" cameras such as OSCAR, Phillips, RS-170 are "American" standard such as PULNIX TM9701 in noninterlaced mode.
Data Translation cards DT3152 and DT3155 can be handled by DTGRAB CMP made software. It is located in Vision_appl:\software\dt\dtagrab\dtgrab.exe. The reccomended values of camera/frame grabber parameters can be stored in INI files. Some prototypes are stored also in Vision_appl:\software\dt\fgsdk32\camfiles with INI extension (not yet).
Data Translation cards can also be handled by other demo programs located in subdirectories of Vision_appl:\software\dt\fgsdk32. The functionality is not guarranteed. The reccomended values of parameters are stored Vision_appl:\software\dt\fgsdk32\camfiles with CAM extensions. All examples of programs can be freely used for making your applications. If you suppose your application will be used also by other people, please consult Vladimir Smutny to arrange compatibility between results of our effort.