Head Mounted Display Visette Pro

HMD is connected to computer 130-4 in the room no. 130. It consist of HMD connected to controller.

How to use HMD in normal mode

Power on computer.
Log in and change resolution to 640x480 32-bit.
Shutdown the computer.
Connect 1-st VGA cable to digital VGA output on graphics card and to LEFT input on Visette Pro controler.
Connect analog input of LCD monitor to VGA output of Visette Pro controler.
Power on computer.
Power on Visette Pro controler.
Power off and power on LCD monitor. Monitor should detect signal on analog (A) input.
Both displays in HMD and LCD monitor should display same booting screen.
Log in.
Now its possible to display anything on HMD.
When finished with HMD. Run Start->Settings->Control Panel->Display->Setting.
Change resolution to 1280x1024 32-bit resolution.
Shutdown computer.
Unplug VGA cable from graphic card.
Connect digital VGA cable to digital output of VGA card and to LCD monitor.
Power off Visette Pro controler.

Power on computer.
Log in and change resolution to 640x480 32-bit.
Shutdown the computer.
Connect 1-st VGA cable to analog VGA output on graphics card and to LEFT input on Visette Pro controler.
Connect 2-nd VGA cable to digital VGA output on graphics card (use digital to analog convertor) and to RIGHT input on Visette Pro controler.
Connect analog input of LCD monitor to VGA output of Visette Pro controler.
Power on computer.
Power on Visette Pro controler.
Power off and power on LCD monitor. Monitor should detect signal on analog (A) input.
Both displays in HMD and LCD monitor should display same booting screen.
Log in. Run Start->Settings->Control Panel->Display->Settings
Enable 2-nd monitor and change its resolution to 640x480 32-bit.
Left HMD LCD should display same screen as LCD monitor and rigt LCD screen should display different screen.
Now its possible to display left image on left screen and right on right screen. Image in HMD should be stereo.
When finished with HMD. Run Start->Settings->Control Panel->Display->Setting.
Disable 2-nd monitor. First monitor change to 1280x1024 32-bit resolution.
Shutdown computer.
Unplug both VGA cables from graphic card.
Connect digital VGA cable to digital output of VGA card and to LCD monitor.
Power off Visette Pro controler.

comments and suggestions to Daniel Vecerka